Nouvelle exécution de surface pour nos préusinés standards de longueurs Lisez le communiqué ici L’extension d’une nouvelle installation de Refusion Sous Laitier (ESU, ESR, RSL) Lisez le communiqué ici Updated 08-12-2010 Key event list Inauguration de notre nouvelle presse à forger dans notre aciérie à Hagfors, Suède Lisez le communiqué ici Prévention de la radioactivité dans les produits Uddeholm Lisez le communiqué ici
News archive

Produit

Produits Uddeholm

Cette section fournit une liste de tous nos produits avec une brève explication. Pour chaque qualité que vous trouverez un bouton pour le télécharger. Ici, vous pouvez entre autre télécharger les éléments suivants en format PDF:

  • La fiche technique du produit dans différentes langues
  • Information sur l’ usinage
  • Information sur le traitement thermique
  • Liste des dimensions standard
  • Liste de stock avec les dimensions standard comprenant une brève explication

 

Si vous avez des questions ou besoin de plus amples informations, vous pouvez toujours nous téléphoner ou nous adresser un courrier électronique.




Choose a steel grade

 A-G M-S T-Z




Alumec 89

Download
High strength aluminium alloy with high strength and good stability. Supplied in the form of hot rolled, heat treated plate and bar.


Alvar

Download
Alvar est un acier allié Cr-Ni-Mo-V pour travail à chaud surtout pour les supports des matrices d’extrusion d’aluminium.


Alvar 14

Download
Alvar 14 est un acier allié Cr-Ni-Mo-V pour travail à chaud avec un bonne ténacité, résistance à la compression et une bonne usinabilité.


Arne

Download
Low alloyed, all-purpose cold work tool steel tool steel with very good machinability. It is suitable for short run tooling for a wide variety of cold work applications. As this is an oil-hardening grade it should only be used for smaller tools (wall thickness less than 50 mm).
This material conforms to W. Nr. 1.2510 / AISI O1.


Balder

Download


Bure

Download


Caldie

Download
Caldie is a high alloyed tool steel with an unique properties profile. It is suitable for short to medium run tooling where chipping and / or cracking are the predominant failure mechanisms and where a high compressive strength (hardness over 60 HRC) is necessary.


Calmax

Download
Calmax is medium alloyed tool steel suitable for short and medium run tooling in applications where a very high chipping resistance is needed. The properties profile makes Calmax a robust cold work tool steel for heavy duty blanking and forming.
This material is conforming to W. No. 1.2358.


Chipper / Viking

Download
A versatile, high alloyed tool steel characterized by the excellent combination of toughness and wear resistance required for chipper-knives and heavy duty blanking and forming.


Corrax

Download
Corrax is a precipitation hardening steel with extremely good corrosion resistance and easy to heat treat. It is used both as mould material and engineering material.


Dievar

Download
A premium Cr-Mo-V-alloyed hot work die steel with very good hardenability, good high temperature strength and excellent ductility and toughness. Recommended when the demands on toughness and ductility are the highest.


Elmax

Download
Powder Metallurgically produced mould steel characterized by a combination of very good wear resistance and corrosion resistance. It is mainly used as insert material within the electronic industry. Use Elmax SuperClean when high wear and corrosion resistance is needed. This material can also be used for engineering applications.


Fermo

Download
Fermo is low/medium alloyed tool steel suitable for blanking and forming in short series and of larger structural parts where the cutting edges are flame or induction hardened. Fermo is delivered in prehardened condition.


Formax

Download
Formax is a low alloyed carbon steel to be used in as-delivered condition as bolster steel for tools and dies or other machine parts.
This material conforms to SS 2172.


Holdax

Download
Prehardened steel with very good machinability, good resistance to indentation and uniform hardness in all dimensions. Mainly as holder steel for the plastic industry. Holdax can also be used for engineering applications.
This material conforms to W. No. 1.2312.


Hotvar

Download
A premium hot work die steel with very good high temperature properties. Can be hardened and tempered to 58 HRC giving an outstanding hot wear resistance. Use it for applications where hot wear and/or plastic deformation are the dominating failure mechanisms.


Impax Supreme

Download
Prehardened mould steel with very good polishing and photo etching properties. It is suitable for a wide range of injection moulds, blow moulds and extrusion dies for plastic. Impax Supreme is supplied at supplied at 290-330 HB.
This material conforms to W. Nr. 1.2738 / AISI P20 Modified.


Mirrax ESR

Download
Mirrax ESR has been developed to meet the industries increased demand on a mould steel with a combination of toughness, corrosion resistance and ability to reach uniform hardness levels throughout large cross sections. At the same time good surface finishes can be achieved.


Mirrax 40

Download
Uddeholm Mirrax 40 (ESR) est un acier résistant à la corrosion et prétraité à 40HRC. Uddeholm Mirrax 40 est produit selon le procédé de "refusions sous laitier électro-conducteur (ESR)". Une phase supplémentaire lors de sa production lui garantit une très haute pureté avec une faible teneur en soufre ainsi que peu de particules non métalliques. De cette manière Le Mirrax 40 présente une très bonne polissabilité. Par le fait que cet acier est déjà prétraité, la durée de fabrication de l’outil est bien plus courte, car il n’y a plus de traitement thermique nécessaire.


Moldmax HH

Download
Moldmax HH is a high-strength beryllium copper mould alloy supplied at ca 40 HRC. Copper-alloys are suitable mould materials where a combination of high thermal conductivity, corrosion resistance and polishablity is needed.


Moldmax XL

Download
Moldmax XL is a high-strength copper-nickel-tin mould alloy supplied at ca 30 HRC. Copper-alloys are suitable mould materials where a combination of high thermal conductivity, corrosion resistance and polishablity is needed.


Nimax

Download
Uddeholm Nimax is a low carbon plastic mould steel delivered at a hardness of ~40 HRC. Uddeholm Nimax has excellent machinability, very good welding properties, good polishing and texturing properties, good resistance against indentations, high impact and fracture toughness and consistent properties through large sections.



Orvar 2 Microdized

Download
Orvar 2 Microdized is a Cr-Mo-V alloyed tool steel (AISI H13 ) with good high temperature strength and hot wear resistance. This material is widely used in aluminium extrusion applications. The dimension programme of round sizes is high.
This material conforms to W. Nr. 1.2344 / AISI H13 / EN X40CrMoV5-1.


Orvar Supreme

Download
Orvar Supreme is a high performance alloyed steel with a good gross cracking and heat checking resistance. It has good toughness and ductility in all directions.
This material conforms to W. No. 1.2344 / AISI premium H13 / EN X40CrMoV5-1.


Polmax

Download
Polmax is a through hardening corrosion resistant mould steel with an excellent polishability, good corrosion resistance and machinability. Widely used for moulds for lenses, compact discs, memory discs and medical applications.
This material conforms to W. No. 1.2083 / AISI 420 Modified.


Protherm

Download
Protherm is a moderate strength high conductivity beryllium copper mould alloy developed for plastics processing applications. Protherm has extremely high thermal conductivity.


QRO 90 Supreme

Download
A premium hot work die steel with very good strength and hardness at elevated temperatures. It also has good thermal conductivity.


Ramax HH

Download
New corrosion resistant holder steel with good machinability, supplied in the prehardened condition. Excellent machinability and good corrosion resistance reduces tool manufacturing and maintenance costs.


Rigor

Download
Medium alloyed tool steel with a good resistance to both the abrasive and adhesive types of wear as well as good resistance to cracking. This combination makes Rigor an all purpose tool steel for medium run cold work applications.
This material conforms to W. No. 1.2363 / AISI A2 / EN X100CrMoV5-1.


RoyAlloy

Download
Uddeholm RoyAlloy est un acier breveté inoxydable porte-outil qui est livré à l’état prétraité.


Sleipner

Download
Sleipner is a high alloyed tool steel with a very broad properties profile. It is also a very good substrate steel for all types of surface treatments. This combination means that Sleipner is an extremely versatile conventional tool steel for medium run cold work tooling.


Stavax ESR

Download
Stavax ESR is a corrosion resistant mould steel, with very good polishability. Main applications can be found as insert material for the medical industry, inserts with demands on high surface finish and where low maintenance is concerned.
This material conforms to W. No. 1.2083 / AISI 420 modified.


Sverker 3

Download
High alloyed tool steel suitable for medium and long run tooling in applications where a very good abrasive wear resistance is needed. Sverker 3 contains large carbides which are advantageous for abrasive wear resistance but which reduce the chipping resistance.
This material conforms to EN X210CrW12.


Sverker 21

Download
High alloyed tool steel suitable for medium run tooling in applications where a good resistance to abrasive wear is generally needed. The 12-% chromium steel is the most common tool steel type used for cold work tooling.
This material conforms to AISI D2 / EN X153CrMoV12. It is close to W. No. 1.2379.


UHB 11

Download
UHB 11 is a low alloyed carbon steel to be used in as-delivered condition as bolster or holder steel for tools and dies or other machine parts. The steel can also be used in hardened and tempered condition for simpler tools.
This material conforms to W. No. 1.1730.


Unimax

Download
Unimax is a chromium-molybdenium-vanadium alloyed universal tool steel with an excellent combination of high ductility and high hardness. The exceptional properties offered, enables it to be used in many tooling applications to improve tool life and productivity.


Vanadis 4 Extra

Download
Uddeholm Vanadis 4 Extra is especially suitable for applications where adhesive wear and/or chipping are the dominating failure mechanisms. And also for blanking and forming of Ultra High Strength Steel Sheet, these materials place high demands on the tool steel regarding abrasive wear resistance and ductility.


Vanadis 6

Download
Vanadis 6 is a high alloyed powder metallurgical tool steel suitable for long run tooling in applications with high demands on mixed wear (abrasive/ adhesive) and chipping resistance. Blanking and forming of hard work materials are typical applications.


Vanadis 10

Download
Vanadis 10 is high alloyed powder metallurgical tool steel suitable for long runs in applications where abrasive wear dominates. The very good wear resistance combined with a good chipping resistance make Vanadis 10 the best solution for abrasive applications.


Vanadis 23

Download
Vanadis 23 is a high alloyed powder metallurgical high speed steel suitable for long run tooling in applications with high demands on mixed wear (abrasive/ adhesive) or where risk of plastic deformation of the working surface of the tooling is encountered.
It is close to W. No. 1.3344 / AISI M3:2 / EN HS 6-5-3.


Vanadis 30

Download
Vanadis 30 is a cobalt high performance high speed steel. The cobalt addition has a positive influence on the hot wear resistance. Hot wear resistance and ductility are key properties in high speed steel cutting tools.
This material conforms to W. No. 1.3207 / M3:2+Co / EN HS 10-4-3-10.


Vanadis 60

Download
Vanadis 60 is a premium high alloyed PM high speed steel with 10,5% cobalt. vanadis 60 is particularly suitable for cutting tools where highest demand on wear resistance and hot hardness prevails.
This material conforms to W. No. 1.3241.


Vancron 40

Download
Vancron 40 is a nitrided powder metallurgical tool steel offering an excellent combination of galling resistance and adhesive wear resistance. Vancron 40 is ideal for severe production conditions and / or long run production in applications where surface coated tool steel is needed in order to solve the above tooling problems.


Vidar 1

Download
Uddeholm Vidar 1 is a chromium-molybdenum-vanadium-alloyed steel. Which is characterized by good high-temperature strength, good toughness and ductility, good machinability and polishability, good through-hardening properties and good size stability during hardening.



Vidar Superior

Download
Uddeholm Vidar Superior is a chromium molybdenum- vanadium alloyed hot work tool steel which is characterized by a high level of resistance to thermal shock and thermal fatigue, good high-temperature strength, excellent toughness and ductility in all directions, excellent through-hardening properties and good dimensional stability during hardening.


 Top
go